Milling the lower side of a Brian May Red Special guitar neck from Khaya Ivorensis (African Mahogany) using a Stepcraft 2/840 CNC machine. Note the video is speeded up 15 x.
Spindle speed: 18,000 rpm
XY feed rate: 2,500 mm/min
Z plunge rate: 120 mm/min
Depth per pass: 2.0 mm (roughing)
Stepover/stepdown: 1.2 mm (finishing)
Cutter: 6 mm two flute solid carbide slot drills (flat end for roughing, ball nose for finishing)
Material: Khaya Ivorensis (African Mahogany) tonewood neck blank (84.5 x 800 x 40.6 mm)
آی-ویدئو