To make this project you will need:
A small blow torch or lighter
A glue gun
A Dremel or rotary tool
A few rotary tool bits(drill, sanding wheels and a cutting wheel)
A permanent marker
The Cutting pattern(can be found here http://kattejuice.deviantart.com/gallery/27672731#/d32rir4 )
A micro servo
4 small nails or pins
A piece of Plexiglas (acryllic, 2x2 inches or 10x10cm)
A large paperclip
And some sealing tape
If you dont have a rotary tool use a drill, some sanding paper and a fine saw.
آی-ویدئو